Search Knowledge Base Articles

(How to) setup RH-M1 PXE Boot

  1. During startup, press "DEL" key until BIOS is entered.
  2. Navigate to Advanced -> Network Stack Configuartion and Enable Network Stack. Also in this section - Disable IPv6 PXE Support.
  3. Press "ESC" key and navigate to Advanced -> CSM Configuration and confirm it is setup as follows. Once this is done press "F4" and save changes, then reboot and enter back into the BIOS.
  4. Navigate to Boot -> Boot Option Properties and set the first boot optios to the USB Network Cards. Once complete press "F4" to save changes and continue to boot.
  5. On boot, media should show as present ad the tablet should start PXE over IPv4 to boot from network.

Did you find this article useful?

Related Articles